Power Transformers

Power transformers are used in power plants, electricity transmission-distribution lines and industrial plants. Power transformers have a wide range of technical features such as power, voltage and adjustment. 5000 kVA and above powers are produced up to 1250 MVA power up to 700 kV voltage level according to customer requests.

All transformers are manufactured in accordance with ISO 9001 and ISO 14001. At the end of the production process, transformers are individually tested in accordance with IEC Standards.

Category:

Ürün Bilgisi

Power transformers are used in power plants, electricity transmission-distribution lines and industrial plants. Power transformers have a wide range of technical features such as power, voltage and adjustment. 5000 kVA and above powers are produced up to 1250 MVA power up to 700 kV voltage level according to customer requests.

All transformers are manufactured in accordance with ISO 9001 and ISO 14001. At the end of the production process, transformers are individually tested in accordance with IEC Standards.

Product Types

  • Generator Transformers
  • Network Transformers
  • Industrial Transformers
  • Special Transformers

                  1. Mobile Transformers

                  2. Railway Tranformers

                  3. Monophase Transformers

                  4. Marine Transformers

                  5. Booster Transformers

Areas of Use

  • Electricity Transmission Lines
  • Industrial Facilities
  • Electricity Generation Centers
  • Mobile Substations

TECHNICAL SPECIFICATIONS

Tests

TESTS ON POWER TRANSFORMERS

·         Measurement of Winding Resistances (IEC 60076-1 Clause 11.2)
·         Measurement of Voltage Convertion Ratio and Control of Phase Displacemenent (IEC 60076-1 Clause 11.3)
·         Measurement of Short Circuit Impedance and load Loss (IEC 60076-1 Clause 11.4)
·         Measurement of no-load loss and current (IEC 60076-1 Clause 11.5)
·         Tests on tap changer under load, if applicable (IEC 60076-1 Clause 11.7)
·         Leakage Test under Pressure for Liquid Immersed Transformers (Sealing Test) (IEC 60076-1 Clause 11.8)
·         Sealing Tests and Pressure Tests for Tanks for Gas-Filled Transformers (IEC 60076-15)
·         Conversion Rate and Polarity Control of Internal Current Transformers
·         Control of Core or Body Insulation for oil immersed transformers (IEC 60076-1 Clause 11.12)
·         Determination of Capacitances Between Windings and Between Windings and Ground
·         Measurement of D.A. Insulation Resistance Between Each Winding and Ground and Between Windings
·         Measurement of Loss Factor (tan δ) of Insulation System Capacitances
·         Measurement of Loss and Current at 90% and 110% of the Rated Voltage at No Load (IEC 60076-1 Clause 11.5)
·         Temperature Rise Test (IEC 60076-2)
·         Determination of the Sound Level for Each Cooling Method for Which a Guaranteed Sound Level is Specified (IEC 60076-10)
·         Measurement of Power consumed by Fan and Liquid Pump Motors
·         Determination of Transient Regime Voltage Transfer Characteristics (IEC 60076-3:2000 Annex B)
·         Measurement of Zero Component Impedance in Three Phase Transformers (IEC 60076-1 Clause 11.6)
·         Shape Change Test under Vacuum in Liquid Immersed Transformers (IEC 60076-1 Clause 11.9)
·         Shape Change Test under Pressure in Liquid Immersed Transformers (IEC 60076-1 Clause 11.10)
·         Measurement of Frequency Response (Frequency Response Analysis, FRA)
·         Measurement of Paint Thickness
·         Paint Quality Control Experiment
·         Checking Core and Body Insulation
·         Isolation of Auxiliary Circuits (IEC 60076-3 Clause 9)
·         Applied Voltage Test (IEC 60076-3 Clause 10)
·         Induced Voltage Withstand Test (IEC 60076-3 Clause 11.2)
·         Induced Voltage Test with Partial Discharge Measurement (IEC 60076-3 Clause 11.3)
·         Line Connection End A.A. Voltage Withstand Test (IEC 60076-3 Clause 12)
·         Full Wave Lightning Impact Test (IEC 60076-3 Clause 13.2)
·         Intermittent Wave Lightning Impact Test (IEC 60076-3 Clause 13.3)
·         Lightning Impact Test at Neutral Connection End (IEC 60076-3 Clause 13.4)
·         Switching Impact Test (IEC 60076-3 Clause 14)
·         Radio Interference Voltage (RIV) Experiment
·         DIRANA (Determination of the amount of water in the transformer insulator) experiment
·         Measurement of Warning Currents
·         Measurement of Idle Current and Voltage Harmonics